dannyboy22
League 2
- 29 July 2003
Right i thought id make this guide for people who have to edit their kits manually in edit mode. I have only done 3 teams myself so far but I will be creating more and more. By the way, i have found a lot of people posting my pictures on other sites and taking credit for themselves so i've printed my name on these.
Below is a sort of step by step guide showing how to add the teams sponsors. I have left the badges for now, I will add those later. It is just a rough guide and the kits aren't perfect, so if you can make them better, do so. Also the first guide will be detailed, the rest of my guides will not be as detailed as you should know your way around the modes by then. Anyway here goes!
Follow this first guide exactly and you shouldn't go wrong....
-------------------------------------------
Firstly how to get there:
EDIT MODE > EDIT TEAM
Select your team (we will be starting with Spurs).
STRIP.
Here will be using the following options:
Now Here's the guides for each of the teams:
SPURS (Home)
Select 1ST STRIP. This will give you the different types of kits you can choose. For the shirt I selected one without a collar and changed all the colours of it to white. As shown above. Do the same with the shorts but make them dark blue and the socks white. Here is a pic of my selected shirt and colours:
Once you are happy, click OK. You should now be back at the "Select strip to change" menu.
Select NAME ON STRIP. This is where the sponsor editor is.
Change the text on the back to suit Spurs style (I haven't bothered with it).
Now see the little shirt icon at the botton with ON and OFF on it? Go down past that and this is now the sponsor editor area. See the picture below to make sure you are in the correct place.
Now you have 4 text layers to work with and 2 logo (picture) layers.
For Spurs shirt I used 1 text layer for the TOMPSON text, one logo layer for the TOMPSON logo and one logo layer for the KAPPA logo. This can be seen below:
Click the first "ABC" Text layer. This screen should appear on your right:
Click the PEN ICON on the left.
Select INPUT TEXT. Type out "Thompson" and click OK
Now select the PEN ICON again. This time select FONT TYPE and choose the 2nd font down and click OK:
Now select the middle button in the menu, showing 4 ARROWS. This will allow you to move the text to different places on the shirt. Move it towards the bottom middle. Select OK. You should now see the logo on the shirt.
Now select the COLOUR ICON between the "ABC" and "Thompson" text.
Choose a RED colour that you are happy with and click OK.
Text is done!
Now onto the Tompson logo:
Go down and select one of the LOGO buttons.
Now you should see 80 black squares. (Or less if you have edited before). Select one of the black squares.
You should now get the same kind of menu as the text layer. Select the PEN icon on the left.
Now you are able to draw the logo for the Tompson sponsor. Here is a pic of the logo editor:
First select the GRID TOOL (top row, 2nd from left). Use the smallest grid squares.
Now if your "canvas" area on the right isn't flashing slowly it means the cansas is white and not transparant. So you need to select the ERASER TOOL (2nd row down, 2nd from left). Now simply erase everything on the canvas so it starts to flash slowly. For quickness change your eraser size to 5x in the bottom left area of the screen.
Once that is done zoom in so you are viewing the canvas with 8x ZOOM by pressing R1.
Now select the PEN TOOL (top row, furthest to the right).
Now select your colour to be WHITE in the bottom right area of the screen. Also make sure your brush size is 1x.
Now follow this guide, taking note of the grid lines. You don't have to be exact, this is just a guide:
If you make a mistake simply use the ERASER TOOL (make sure its size is 1x).
There is also a FILL TOOL (2nd row, 3rd from left) if you want to quickly fill an area (make sure you fill an area without gaps as you will end up filling the whole screen).
Once you have something that looks like the Tompson logo above then click the END CREATION button (4th row down).
Select STOCK AND END.
Select the MIDDLE ICON (4 arrows) to move your created logo on your shirt. Place it just above the Tompson text you created. Click OK.
Select the COLOUR ICON next to the logo you created and select a red colour.
Your Tompson logo should now be completed.
Now onto the KAPPA LOGO:
Now you do exactly the same as above but select a different black square as you don't want to overwrite the previous logo.
Make sure you have a transparant canvas (it should be flashing slowly) and the draw the kappa logo in white. Here is the guide below, 8x zoom and the smallest grid squares:
Once you are done select END CREATION again and then STOCK AND END.
Now Use the move icon to move the Kappa logo you have created towards the top left of the box. Click OK.
Now select a dark blue colour for this logo.
Go up the the top of the screen and click OK. You should now be back to the strip menu and your sponsors are completed.
----------------------------------------
If people want more pictures of the menu's etc I can do that but you shouldn't need them if you follow everything exactly.
Below is a sort of step by step guide showing how to add the teams sponsors. I have left the badges for now, I will add those later. It is just a rough guide and the kits aren't perfect, so if you can make them better, do so. Also the first guide will be detailed, the rest of my guides will not be as detailed as you should know your way around the modes by then. Anyway here goes!
Follow this first guide exactly and you shouldn't go wrong....
-------------------------------------------
Firstly how to get there:
EDIT MODE > EDIT TEAM
Select your team (we will be starting with Spurs).
STRIP.
Here will be using the following options:
Now Here's the guides for each of the teams:
SPURS (Home)
Select 1ST STRIP. This will give you the different types of kits you can choose. For the shirt I selected one without a collar and changed all the colours of it to white. As shown above. Do the same with the shorts but make them dark blue and the socks white. Here is a pic of my selected shirt and colours:
Once you are happy, click OK. You should now be back at the "Select strip to change" menu.
Select NAME ON STRIP. This is where the sponsor editor is.
Change the text on the back to suit Spurs style (I haven't bothered with it).
Now see the little shirt icon at the botton with ON and OFF on it? Go down past that and this is now the sponsor editor area. See the picture below to make sure you are in the correct place.
Now you have 4 text layers to work with and 2 logo (picture) layers.
For Spurs shirt I used 1 text layer for the TOMPSON text, one logo layer for the TOMPSON logo and one logo layer for the KAPPA logo. This can be seen below:
Click the first "ABC" Text layer. This screen should appear on your right:
Click the PEN ICON on the left.
Select INPUT TEXT. Type out "Thompson" and click OK
Now select the PEN ICON again. This time select FONT TYPE and choose the 2nd font down and click OK:
Now select the middle button in the menu, showing 4 ARROWS. This will allow you to move the text to different places on the shirt. Move it towards the bottom middle. Select OK. You should now see the logo on the shirt.
Now select the COLOUR ICON between the "ABC" and "Thompson" text.
Choose a RED colour that you are happy with and click OK.
Text is done!
Now onto the Tompson logo:
Go down and select one of the LOGO buttons.
Now you should see 80 black squares. (Or less if you have edited before). Select one of the black squares.
You should now get the same kind of menu as the text layer. Select the PEN icon on the left.
Now you are able to draw the logo for the Tompson sponsor. Here is a pic of the logo editor:
First select the GRID TOOL (top row, 2nd from left). Use the smallest grid squares.
Now if your "canvas" area on the right isn't flashing slowly it means the cansas is white and not transparant. So you need to select the ERASER TOOL (2nd row down, 2nd from left). Now simply erase everything on the canvas so it starts to flash slowly. For quickness change your eraser size to 5x in the bottom left area of the screen.
Once that is done zoom in so you are viewing the canvas with 8x ZOOM by pressing R1.
Now select the PEN TOOL (top row, furthest to the right).
Now select your colour to be WHITE in the bottom right area of the screen. Also make sure your brush size is 1x.
Now follow this guide, taking note of the grid lines. You don't have to be exact, this is just a guide:
If you make a mistake simply use the ERASER TOOL (make sure its size is 1x).
There is also a FILL TOOL (2nd row, 3rd from left) if you want to quickly fill an area (make sure you fill an area without gaps as you will end up filling the whole screen).
Once you have something that looks like the Tompson logo above then click the END CREATION button (4th row down).
Select STOCK AND END.
Select the MIDDLE ICON (4 arrows) to move your created logo on your shirt. Place it just above the Tompson text you created. Click OK.
Select the COLOUR ICON next to the logo you created and select a red colour.
Your Tompson logo should now be completed.
Now onto the KAPPA LOGO:
Now you do exactly the same as above but select a different black square as you don't want to overwrite the previous logo.
Make sure you have a transparant canvas (it should be flashing slowly) and the draw the kappa logo in white. Here is the guide below, 8x zoom and the smallest grid squares:
Once you are done select END CREATION again and then STOCK AND END.
Now Use the move icon to move the Kappa logo you have created towards the top left of the box. Click OK.
Now select a dark blue colour for this logo.
Go up the the top of the screen and click OK. You should now be back to the strip menu and your sponsors are completed.
----------------------------------------
If people want more pictures of the menu's etc I can do that but you shouldn't need them if you follow everything exactly.